NEW GPT GO KART CHAIN FOR 196CC 4 STROKE ENGINE RUST RESISTANT HEAVY DUTY

Description

Do you need to drive your kart or buggy with 3.5 to 7 HP four stroke engine. Then this setup is just what you want. The clutch will suit a 19.1mm or 3/4 inch engine shaft. And will engage the drive or should I say drive the rear axle at around 2000 RPM. The only thing to remember is to oil the chain and clutch bearing every half hour of use. That way it will keep going forever. The chain is 60 links and around 74 cm long. The sprocket carrier 35 Pitch Chain 60 Link with Removable Link (extend or shorten easily). Designed for 4 stroke go karts. We’ve sold thousands of these to racers around the country without failure! If you have a friend who’s bought one – go ask them, you’ll be pleasantly surprised with the performance of our chains. Reliable, tried and tested performance for your 4-stroke